Ngā Kōtaha Hanganga Rino o Amerika ASTM A36 I kurupae
| Taonga | Whakatakotoranga / Taipitopito |
|---|---|
| Paerewa Rauemi | ASTM A36 (hanganga whānui) |
| Te Kaha o te Hua | ≥250 MPa (36 ksi); Kaha Kukū ≥420 MPa |
| Roa | Rauemi: 6 mita me te 12 mita |
| Tiwhikete Kounga | Whakamātautau tuatoru a SGS/BV (te kume me te piko) |
| Whakaotinga Mata | Te whakakoi wera, te peita, me ētahi atu; ka taea te whakarite |
| Ngā tono | Ngā whare, ngā piriti, ngā hanganga ahumahi, te moana me te kawe waka |
| Waro ōrite (Ceq) | ≤0.45% (e whakarite ana i te pai o te whakarewa); hototahi ki te waehere whakarewa AWS D1.1 |
| Kounga Mata | Kāore he kapiti, he koha, he whāriki rānei e kitea ana; he papatahi ≤2 mm/m; he poutū te taha ≤1° |
| Taonga | Whakatakotoranga | Whakaahuatanga |
|---|---|---|
| Te Kaha o te Hua | ≥250 MPa (36 ksi) | Te ahotea i te wāhi e tīmata ai te rauemi i te whakarerekētanga kirihou |
| Kaha Kume | 400–550 MPa (58–80 ksi) | Te ahotea mōrahi i mua i te pakaru i raro i te ahotea |
| Te whakaroa | ≥20% | Te rerekētanga kirihou neke atu i te 200 mm te roa |
| Te pakeketanga (Brinell) | 119–159 HB | Tohutoro mārō rauemi |
| Waro (C) | ≤0.26% | Ka pā ki te kaha me te āheinga whakarewa |
| Manganēhi (Mn) | 0.60–1.20% | Ka whakanui ake i te kaha me te pakari |
| Whānariki (S) | ≤0.05% | Ko te iti o te whanariki ka pai ake te pakari |
| Whēkau (P) | ≤0.04% | Ka whakapai ake te iti o te whākōkī i te pakari |
| Hiraka (Si) | ≤0.40% | Ka tāpiri kaha, ka āwhina hoki i te tango waikura |
| Taonga | Taumaha (kg/m) | Hōhonutanga (mm) | Whānui (mm) | Matotoru o te tukutuku (mm) | Te matotoru o te flange (mm) |
|---|---|---|---|---|---|
| IPE 80 | 6.0 | 80 | 46 | 3.8 | 5.2 |
| IPE 100 | 8.1 | 100 | 55 | 4.1 | 5.7 |
| IPE 120 | 10.4 | 120 | 64 | 4.4 | 6.3 |
| IPE 140 | 12.9 | 140 | 73 | 4.7 | 6.9 |
| IPE 160 | 15.8 | 160 | 82 | 5.0 | 7.4 |
| IPE 180 | 18.8 | 180 | 91 | 5.3 | 8.0 |
| IPE 200 | 22.4 | 200 | 100 | 5.6 | 8.5 |
| IPE 220 | 26.2 | 220 | 110 | 5.9 | 9.2 |
| IPE 240 | 30.7 | 240 | 120 | 6.2 | 9.8 |
| IPE 270 | 36.1 | 270 | 135 | 6.6 | 10.2 |
| IPE 300 | 42.2 | 300 | 150 | 7.1 | 10.7 |
| IPE 330 | 49.1 | 330 | 160 | 7.5 | 11.5 |
| IPE 360 | 57.1 | 360 | 170 | 8 | 12.7 |
| IPE 400 | 66.3 | 400 | 180 | 8.6 | 13.6 |
| IPE 450 | 79.1 | 450 | 190 | 9.4 | 14.6 |
| IPE 500 | 90.7 | 500 | 200 | 10.2 | 16 |
| IPE 550 | 106.0 | 550 | 210 | 11.2 | 17.2 |
| IPE 600 | 124.4 | 600 | 220 | 12 | 19 |
| Taonga | Taumaha (kg/m) | Hōhonutanga (mm) | Whānui (mm) | Matotoru o te tukutuku (mm) | Te matotoru o te flange (mm) |
|---|---|---|---|---|---|
| IPN 80 | 5.9 | 80 | 42 | 3.9 | 5.9 |
| IPN 100 | 8.3 | 100 | 50 | 4.5 | 6.8 |
| IPN 120 | 11.1 | 120 | 58 | 5.1 | 7.7 |
| IPN 140 | 14.3 | 140 | 66 | 5.7 | 8.6 |
| IPN 160 | 17.9 | 160 | 74 | 6.3 | 9.5 |
| IPN 180 | 21.9 | 180 | 82 | 6.9 | 10.4 |
| IPN 200 | 26.2 | 200 | 90 | 7.5 | 11.3 |
| IPN 220 | 31.1 | 220 | 98 | 8.1 | 12.2 |
| IPN 240 | 36.2 | 240 | 106 | 8.7 | 13.1 |
| IPN 260 | 41.9 | 260 | 113 | 9.4 | 14.1 |
| IPN280 | 47.9 | 280 | 119 | 10.1 | 15.2 |
| IPN 300 | 54.2 | 300 | 125 | 10.8 | 16.2 |
| IPN320 | 61.0 | 320 | 131 | 11.5 | 17.3 |
| IPN 340 | 68.0 | 340 | 137 | 12.2 | 18.3 |
| IPN 360 | 76.1 | 360 | 143 | 13 | 19.5 |
| IPN 400 | 92.4 | 400 | 155 | 14.4 | 21.6 |
| IPN 450 | 115 | 450 | 170 | 16.2 | 24.3 |
| IPN 500 | 141 | 500 | 185 | 18 | 27 |
| IPN 550 | 166 | 550 | 200 | 19 | 30 |
| IPN 600 | 199 | 600 | 215 | 21.6 | 32.4f |
| Tawhā | Awhe Noa | Manawanui ASTM A6/A6M | Ngā Tuhipoka |
|---|---|---|---|
| Hōhonutanga (H) | 100–600 mm (4"–24") | ±3 mm (±1/8") | Me noho tonu ki roto i ngā rohe rahi ingoa |
| Whānui o te Flange (B) | 100–250 mm (4"–10") | ±3 mm (±1/8") | Ka pumau te whānui, ka pumau te kaha kawenga |
| Matotorutanga o te Tukutuku (tₙ) | 4–13 mm | ±10% ±1 mm rānei (ko tēhea te mea nui ake) | Ka pā ki te mahi kutikuti |
| Matotoru o te Flange (t_f) | 6–20 mm | ±10% ±1 mm rānei (ko tēhea te mea nui ake) | Te kī mō te kaha piko |
| Roa (L) | Paerewa 6–12 m; ritenga 15–18 m | +50 / 0 mm | Kāore e whakaaetia te manawanui kino |
| Te tika | — | 1/1000 o te roa | He kāmepa 12 mm mō te kurupae 12 m |
Rino Waro Hurihia Wera
Te maitai waro whakapūmau wera-tuku: ≥85μm
Hinu Pango
| Kāwai Whakaritenga | Ngā Kōwhiringa | Whakaahuatanga | MOQ |
|---|---|---|---|
| Ahu | Teitei (H), Whānui o te Flange (B), Matotoru o te Web me te Flange (tₙ, t_f), Roa (L) | Rahi paerewa, rahi ritenga rānei; e wātea ana te tapahi-ki-te-roa | 20 tāne |
| Te Maimoatanga Mata | Kua hurihia (mangu), Te pupuhi onepu, Te hinu ārai-waikura, Te paninga peita/epoxy, Te whakapūmau wera-tō | Whakapai ake i te ātete ki te waikura mō ngā momo taiao | 20 tāne |
| Te tukatuka | Te keri, te whakatō, te tapahi porotaka, te whakarewa, te tukatuka pito-mata, te hanga-mua | Te hanga kia rite ki ngā tuhi; he pai mō ngā anga, ngā kurupae, me ngā hononga | 20 tāne |
| Te Tohu me te Tākai | Tohu ritenga, Tākai, Pereti pito tiaki, Tākai ā-wai, Utaina ipu | Ka whakarite kia haumaru te whakahaere me te tuku; he pai mō te utanga moana | 20 tāne |
-
Ngā Hanganga WhareNgā whare teitei, ngā wheketere, ngā whare putunga, me ngā piriti, e whakarato ana i te tautoko matua mō te pikaunga.
-
Te Hangarau PiritiNgā kurupae mō ngā piriti waka me ngā piriti hīkoi.
-
Ngā Taputapu Taumaha me te Tautoko AhumahiNgā tautoko mō ngā mīhini nui me ngā papa ahumahi.
-
Te Whakapakari HangangaTe whakapakari, te whakarerekē rānei i ngā hanganga o nāianei hei whakapai ake i te ātete ki te pikaunga me te piko.
Hanganga Whare
Te Hangarau Piriti
Tautoko Taputapu Ahumahi
Whakakaha Hanganga
1) Tautoko reo Pāniora, āwhina whakawātea tikanga, me ētahi atu.
2) Tata ki te 5,000 tana o ngā taonga kei roto i te taonga, me te whānuitanga o ngā rahi
3) I tirotirohia e ngā whakahaere mana pēnei i a CCIC, SGS, BV, me TUV, me ngā takai paerewa mō te moana
Te tākai
Parenga Whānui: Ka herea ngā kurupae-I ki te tāpaurini i hangaia mā roto i ngā putea whakamaroke e 2–3; ka ārai te pepa hiri-wera, ātete-ua i te makuku.
Herenga Haumaru: He whitiki maitai 12–16 mm te roa huri noa i ia herenga; he pai mō ngā taputapu hiki e 2–3 tana me ngā taputapu hiki e hototahi ana ki te US.
Tapanga Mārama: Kei roto i ngā tapanga reo rua Ingarihi/Pāniora te māka, ngā whakaritenga, te waehere HS, te nama puranga, me te tohutoro ki te pūrongo whakamātautau.
Parenga Kōtaha Teitei: Ko ngā kurupae-I he teitei ≥800 mm i pania ki te hinu whakahāngai, ā, i takaihia kia rua ngā wā ki te tāpaurini.
Tukunga
Tukunga Pono: Te mahi tahi me ngā kaikawe pai rawa atu (MSK, MSC, COSCO me ētahi atu) hei whakarite i te haumaru o te tuku.
Mana Kounga: Tukanga ISO 9001; ka aroturukitia ngā hihi mai i te takai ki te kawe kia tino tae atu ki a koe me te kore raruraru, kia kore ai he raruraru mō te kaupapa.
Q: He aha ngā paerewa mō āu hihi-I i Amerika Waenganui?
A: Kei te tutuki ā mātou I Beams i ngā paerewa ASTM A36 me te A572 Grade 50, koinei te mea e whakamahia whānuitia ana. Ka taea hoki e mātou te whakarato hua e tutuki ana i ngā whakaritenga ā-rohe.
Q: Kia pehea te roa o te tuku ki Panama?
A: Te Wā Whakawhiti Utauta Moana mai i te Tauranga o Tianjin ki te Rohe Tauhokohoko Koreutu o Colon 28–32 ngā rā wiki.
Q: Ka āwhina koe ki te whakawātea i ngā taake?
Āe, mā ā mātou kaihokohoko ngaio e mahi te whakapuakitanga tikanga.
Wāhitau
Bl20, Shanhecheng, Shuangjie Street, Beichen District, Tianjin, Haina
Ī-mēra
Waea
+86 13652091506
